Controladora fettec g4 version osd digital
40 €
Detalles del productoenvio por wallapop previo pago por bizum o paypal
* Latest STM32G4 Processor
* 170Mhz + Math accelerator
* MPU6000
* Supply voltage 6-27V (2S-6S Lipo)
* 2x dedicated onboard BEC (max. 600mA each)
* 5V BEC for RX
* 5V/16V BEC for VTX (switchable and real Pit*)
* 2x 8 pin connector for solder free ESC connection
* Connector 1: ESC signal 1-4, telemetry, VCC, GND
* Connector 2: ESC signal 5-8 (depending on UAV type 1-4), telemetry, VCC, GND
* 1x 8 pin connector for solder free VTX, cam connection and OSD or digital systems
* real Pit* VCC, GND, Video in, Video out, BEC 5V/16V, VCS/TX3, RX3
* 2x 6 pin connectors for serials
* RX1, TX1, 3.3V, VCC, 5V, GND
* RX3, VCS/TX3, RGB LED, VCC, 5V, GND
* 1x 4 pin connector for receiver
* Signal, TLM, 5V, GND
* 5 UART serials
* UART 1 free
* UART 2 used for Receiver
* UART 3 free
* UART 4 used for onboard OSD, can be set free
* UART 5 used for ESCs / TLM / Onewire
* 4 ESC solder pads (Signal/GND) in each corner
* Buzzer pads
* 4 tiny RGB LEDs (selectable color)
* Supported ESC protocols
* PWM, Oneshot125, Oneshot42, Dshot150/300/600/1200/2400, FETtec Onewire
* FETtec KISS firmware
* Onboard OSD
* Graphic OSD (STM32)
* Full KISS Tuning
* Filter (PIDs, Rates, Settings)
* LED control (RGB LED, Racewire)
* VTX
* Live data graphs (Voltage, motor rpm, current, motor temp, gyro values, link quality)
* KISS GPS support + live map
* Custom graphic pilot logo
* Stick overlay
* Custom layout
* can be deactivated for usage of digital systems
* Connector type: JST-SH-1mm
*real Pit-Mode: A power supply pin which is remotely switchable
Editado hace más de 1 mes